LC-500 Cuff Heat Shrinkable Packaging Machine
This machine is suitable for the packing of the pill boxes, bottles
and food, chemicals, cosmetics, drinks off-grade box and set the
sleeve type PE film heat shrinkable packaging, top speed of 30
packets per minute, good quality, can automatically finish goods
stacked collection, transport in place, transport, packaging film
sealed packaging film, shrink, photoelectric control, frequency
control, PLC, man-machine interface, in the operation of the
abnormal can automatically show the cause of the problem, and
troubleshooting.This machine can be used alone, can also with box
packing machine, labeling machine, packing machine to connect into
line.
Parameter
Feeding Horizontal Dimension: 900±50mm
Wrapper:PE heat shrinkable film;
Max Packing Size:300x200x300mm ( LxWxH )
Electric:380V/50hz,three phase;
Air Pressure: 0.5-0.7Mpa;
Capacity:2-30 bags/min;
Actual Consumption of Work Power:12.8kw
Overall Dimension:2850 x 900 x 1470 mm (LxWxH) (not include the
sending bottle length)
Weight: 400KG;
Material:1cr18ni9Ti carbon steel
Prepareing for installation
1, It is important to note to use the machine grounding
(PE),grounding conductor (below 4 Ω ф 1.5 was more than copper
wire). Pay attention to using the machine to the injecting grease
lubrication system;
2, Machine mounted on levels of hard surface,flow around to avoid
high temperature, moisture, dust. Please do not erode by corrosive
gas and oil! In the environment of high temperature under the
condition of 30% 90%;
3, Workshop to configure the power supply voltage 380 v / 50 hz,
appropriate location within the workshop to install a 100 a of the
air circuit breaker;
4, For compressed air pipe to be installed on a 1/2 "cut-off valve,
air supply pressure is greater than 0.5 Mpa clean, dry compressed
air;
5,Workshop area more than 5 x 5.5 m2. Open the door wide at 1.2 m,
1.6 m tall;
