Pharmaceutical vacuum double cone rotary powder mixing dryer drying
mixer
The double cone rotary vacuum dryer is widely used in the drying of
granules, including crystal materials, in pharmaceutical, chemical,
food, dyestuff, powder metallurgy and other industries.
The dryer is cylindrical in shape and conical at both ends.
The top of the cone is provided with a discharge port (which is
also used as a hole),Inside the machine, it is divided into three
layers,The middle of the heating medium jacket can be with
heat-conducting oil, steam (less than 0.3MPa pressure gauge) or
circulating hot water (<0.3mpa pressure gauge),The medium
temperature is medium alkali superfine glass cotton, the energy
consumption is very few; the inner layer releases the
material,Rotary drying under vacuum conditions, the material edge
flip side wall by acquiring heat, accelerating the drying, so as to
avoid the heat sensitive materials in the dry surface yellowing
phenomenon, and greatly shorten the drying time, drying time is
only similar material needed in a vacuum oven in the 2/3, improve
the labor productivity, especially suitable for the oxidation of
dangerous materials and allergic drying; in the shape of the
material requirements without damaging the goods, strictly limit
the metal ion materials and discharged volatiles (or toxic
substances) to recovery (or destroy toxic) materials, is to
demonstrate its superiority.
Both ends of the cylinder are equipped with the most advanced
rotary joint to seal, which changes the bad phenomenon that the
packing seal is easy to wear and vacuum leakage. The dryer has the
advantages of simple operation, convenient feeding and discharging,
greatly reducing the labor intensity of workers, reducing the
environmental pollution caused by the drying process of the
material, improving the quality of the products, and meeting the
requirements of the drug management standard "GMP"
Parameter
| Model | SZG-100 | SZG-350 | SZG-500 | SZG-750 | SZG-1000 | SZG-1500 | SZG-2000 |
| Total volume (L) | 100 | 350 | 500 | 750 | 1000 | 1500 | 2000 |
| Loading volume (L) | ≤50 | ≤ 175 | ≤ 250 | ≤ 375 | ≤ 500 | ≤ 750 | ≤ 1000 |
| Rotary speed (r/min) | 3-13 |
| Motor power (kw) | 0.75 | 1.1 | 1.5 | 2 | 3 | 3 | 4 |
| Rotary height (m) | 1.75 | 2.1 | 2.25 | 2.49 | 2.8 | 2.94 | 2.99 |
| Tank inner pressure (Mpa) | -0.1-0.15 |
| Clip set pressure (Mpa) | ≤ 0.3 |
| Working temp.(°C) | Inner tank ≤ 85 Clip set ≤ 140 |
| Heating media | Steam, Hot water, Heat transfer oil |
| Weight (kg) | 800 | 1100 | 1200 | 1500 | 2800 | 3300 | 3600 |
| Floor area (L*W) | 2160*800 | 2260*800 | 2350*800 | 2550*1000 | 2860*1300 | 3260*1400 | 3760*1800 |
