| Processing system | Name | Specifications | Unit | Q’ty |
| Raw material pretreatment system | Soaking and thawing tank | Effective volume 500L； | set | 1 |
| Flaker | 200kg/h；3kW/380V; | set | 1 |
| Meat grinder | 200kg/h；The material contact part is sus304； | set | 1 |
| Cooking pot | Effective volume 500L；The material is SUS304,Vertical
heat-insulation boiler； | set | 4 |
| Deployment system | High speed mixer | 200L；The material is SUS304, | set | 1 |
| Mixing pump | Rotary pump；Q=1.5t/h； | set | 1 |
| Boiling pump | Rotary pump；Q=1.5t/h； | set | 1 |
| Enzyme hydrolytic liquid delivery pump | Rotary pump；Q=1.5t/h； | set | 1 |
| Centrifugal liquid pump | The material contact part is sus304,Centrifugal pumps.flow Q=1.5t/h | set | 1 |
| Thermostatic liquid conveying pump | Rotary pump:The material contact part is sus304,Centrifugal pumps.
flowQ=1.0t/h ； | set | 1 |
| Buffer tank | Effective volume 100L；material:SUS304； | set | 1 |
| Colloid mil | 100-300 kg/h；Material crushing particle size:2-50µm； | set | 1 |
| Dispensing tank | Volume:200L； | set | 1 |
| Juice collecting tank | 50L；Single layer horizontal tank with movable cover | set | 1 |
| Separating liquid transfer pump | Q=1.5t/h； | set | 1 |
| High temporary storage tank | Effective volume 300L； | set | 1 |
| Surge tank | Effective volume:200L； | set | 1 |
| Waste residue tank | 300L,Material:SUS304,Single layer movable slot with movable wheel.
Groove thickness δ = 2.5mm | set | 1 |
| Filter system | Tube centrifuge | Liquid-solid separation (GF type),Contact with liquid part of
material sus304, fuselage shell is stainless steel, ； | set | 1 |
| Oil phase temporary storage tank | 200L；Tank material:SUS304,single layer； | set | 1 |
| Stainless steel board plate and frame filter | The plate and frame material is sus304, integral stainless steel,
and the filtration area is 2m2. | set | 1 |
| Disc centrifuge | 500L/h；Drum speed:7546rpm； separation efficiency :Content of
impurities after separation.≤0.2ppm；1.5 kW/380V | set | 1 |
| Fermentation system | Enzyme hydrolysis tank | Effective volume:500L；Vertical heat preservation； | set | 2 |
| High-temperature cook pot | 100L；Cylinder lock hook locking slag discharge door； | set | 1 |
| Bactericidal system | Tube sterilizer | Feed temperature:20-30℃；Discharge temperature:≥85℃；Sterilization
temperature: up to 145 ℃; sterilization time: according to customer
process; treatment flow rate: 100l-300l/h； | set | 1 |
| Concentration system | Falling film concentration system | The main material is sus304 stainless steel, rated evaporation is
about 100L / h, installed power is about 8kw, feeding temperature
is 25 ℃, steam consumption is about 60kg / h, steam intake pressure
is not less than 5bar, cooling water consumption is 3000kg/h 30
℃(in), 40 ℃(out), The inlet pressure is not less than 2 bar, and
the heating area is about 1m²; The second effect area is about
1.5m², the primary evaporation temperature is about 65 ℃, and the
secondary evaporation temperature is about 50 ℃. The equipment
includes 3 centrifugal pumps, 1 vacuum pump, 2 screw pumps, 2
heaters, 2 evaporation chambers and 1 tubular condenser. One each
for the feed tank and one for the discharge tank, the rack and the
connecting pipe | set | 1 |
| Spray dryer | Spray dryer | The maximum water evaporation rate is 50L/H, The inlet air temperature range is 40 ℃-300 ℃, The outlet air temperature range is 40 ℃-140 ℃, The heating temperature control accuracy is ±1 ℃, and the drying
time is 1.0-1.5 S. The feed range of peristaltic pump is 50L/H Dry air flow rate: 0-100m³min, maximum wind pressure 686Pa, Spray gas flow rate: 0-80m³/H, spray pressure 2-8bar, Spray system: two-fluid nozzle with (0.5--2.5MM), The jet (through needle): 0-20s can be adjusted automatically, Spray/hot air flow direction: in the same direction, downward, Heater power: 30KW 380V, Whole machine power: 40KW380V | set | 1 |
| Auxiliary operation unit | Steam converter | Steam 75kg/h | | 2 |
| Compressed-air system | 1m3/h,With gas storage tank, fully automatic | | 1 |
Pipe, valve parts material and installation | | | |
| Pure water system | The water output is 0.5t / h, with 1m3 pure water tank, frequency
conversion process: quartz sand + activated carbon + softened
security filter + reverse osmosis device (imported membrane)) | set | 1 |
| CIP system | The effective volume is 500l, acid tank, alkali tank, clear water
tank, sus304 material; | set | 1 |
| Dual pipe filter | Shell sus304 material | set | 1 |
| Dual filter | Shell sus304 material, | set | 1 |
| Ceramic filtration system | 0.5~1t/h；Body material SUS304；The filtration accuracy of ceramic
membrane is 1um. with cleaning tank | set | 1 |
| Nanofiltration system | 0.5~1t/h；Glass fiber reinforced plastic (FRP), imported pvdf
nanofiltration membrane tube from the United States, | set | 1 |
| Filter Pre tank | The effective volume is 200l； | set | 1 |
| Bleacher | The effective volume is 300l and the material is sus304., | set | 1 |
| Liquid phase temporary storage tank | 200L,Tank material sus304, single layer, large open cover;
thickness δ = 3mm | set | 1 |
| Liquid phase pump | centrifugal pump；Q=1.5t/h； | set | 1 |
| Cold and hot cylinder | Capacity 100l; three layers of heat preservation, with heating
(cooling) and insulation interlayer； | set | 1 |
| Pre-irrigation pump | Q=1.5t/h,H=24m,1.1 kW/380V | set | 1 |
| Finished product temporary storage tank | The effective volume is 200l. the material is sus304.； | set | 1 |
| Buffer tank | Effective volume 500l; material sus304, | set | 2 |
| Finished product pump | Q=1.5t/h,H=40m, | set | 2 |
| Material-handling pump | Q=1.5t/h,H=24m,1.1 kW/380V | set | 1 |
| Heat-exchanger pump | Vertical pipeline pump；Q=1.5t/h,1.5 kW/380V | set | 1 |
| Packaging system | Bottle specification 10 - 130ml, double head filling single head
rotary cover; power: 1.2 kw/380v; filling accuracy: ≤ 1% PLC
control; touch screen display; belt in and out bottle conveyor
chain; After the bottle conveyor chain comes with the inverted
bottle platform 1000 × 400mm, the height is equal to the conveyor
chain, stainless steel material; suitable for round bottle, square
bottle and other bottle filling rotary cover, including flushing,
filling, rotating cap, marking machine. Full automatic control is
required for flushing and filling | set | 1 |
| Installation charge | | | 1 |
